Some of the most common questions and Google search queries that we receive are:
Question: How do I connect my favorite ps/2 keyboard to a new computer that only has USB ports?
Answer. Older keyboards typically use a ps/2 connector (round connector with 4 or 6 pins). If you want to connect your older keyboard to a new PC or Mac you will need to physically change the ps/2 plug to a USB plug (rectangular, flat connector).
ps/2 connector USB connector
Question: My cheap ps/2-USB green or purple adapter is not auto-detected by Windows plug and play and I can’t get it to work. Where can I download the drivers?
(typical examples of passive ps/2 to USB adapters that are not true ps/2 to USB signal converters)
Answer: The vast majority of commonly available ps2 to USB converters are simple passive ADAPTERS that simply change the plug shape to match the outlet. These ADAPTERS only function to connect the ps/2 wires to the approximate USB wires. Simple ps/2 to USB adapters do not use specific software drivers.
In general, most users having trouble connecting their keyboard to newer computers are looking for a ps/2 to USB signal CONVERTER. These devices use an integrated circuit (pre-programmed chip) to actively translate the ps/2 keyboard signal and convert it into a USB keyboard signal.
This allows the vintage ps/2 keyboard to be automatically recognized by the operating system as if it were a standard, modern USB keyboard. A well-designed active ps/2 to USB converter will use the built-in operating system drivers for a USB keyboard (for example in Microsoft Windows XP, kbdclass.sys and kbdhid.sys).
Question. Why can’t I just make the ps/2 physical adapter and USB converter myself. It must be a cheap and simple thing to do. I am teh 3733t hX0R.
A. If you are a master electronics technician with degrees in EE, you could of course take the time and money to do it yourself. see link for 36-page technical schematics and designer reference manual for MC68HC908JB8. (or you could just buy the pre-built $15 adapter listed on our page)
Question: I am very familar with ’puters and am good with a screwdriver and I know how to open my computer. Why can’t I buy an expansion card with a ps/2 port that fits into a PCI slot. I have seen these before on my computers at work and they must be readily available.
A. As a corporate IT admin and systems engineer in real-life, I have seen Dell computers with ps/2 ports on the back of computers where the PCI slot covers are. However, this specialized part sold by Dell (part# F3636) was only intended to be used with certain Dell Optiplex computers. This part does not actually plug into any PCI slots of the motherboard, but insteads uses a 24-pin ribbon cable to connect directly to a special connector on certain Dell Optiplex motherboards.
The keyboard interface is an elementary low-level device and it needs to be initalized very early during the boot process. Any true PC hardware geek with real-world experience knows that the PCI bus is not setup and cannot be used to capture the type of direct, low-level I/O signals between the keyboard and computer.
Question: Why is it so hard to find an USB adapter that will make a vintage IBM keyboard interface with a modern Pentium 4-based motherboard.
Answer: Online reports indicate that vintage IBM ps/2 keyboards pull up to 100x more current compared to modern keyboards (112 mA vs 1.2 mA). see reference: (http://web.archive.org/web/20080228180642/http://www.geocities.com/jszybowski/keyboard/index.htm)
One way to resolve this problem to add resistors to change the voltage, or an easier non-destructive fix is to use an active ps/2 to USB converter with built-in electronics.
Question: Will this adapter / converter work with the extra buttons on my multimedia keyboard (volume control, sleep, check mail, go to WWW home page, more lotion)? Will it work if my keyboard uses a special software driver? Can you 100% guarantee and really, really promise that it will work with my hardware combination.
Answer. This converter / device will translate the basic set of 101-104 keyboard signals which are found on all keyboards. It will translate the signal from ps/2 to their USB equivalents. This device then uses the generic, built-in USB keyboard driver which allows the operating system to think that a USB keyboard is attached.
It does not translate and process the codes for the extra non-standard keys on multimedia keyboards. This device will work on basic set of 101-keys on an American English keyboard, but will also work with 102-keyboards (e.g,. various European layouts), as well as 104/105-keys (101/104 keys + windows keys). The computer will use the standard USB driver for a USB keyboard.
Unfortunately, due to the variety of combinations of different keyboards, computers, operating systems, user expertise, keyboard cable lengths, age of vintage hardware, etc.. we cannot guarantee 100% compatibility. We do offer a standard 30-day simple return policy on all purchases.
2 remaining in stock.